Exam TipsStudy Guide

18th Edition Exam Question Order: How to Use Part Order to Find Answers Faster

IET Wiring Regulations Team ·
18th Edition Exam Question Order: How to Use Part Order to Find Answers Faster

The 18th Edition exam is open-book, but you can only use the book well if you know where to look. Two of the most common questions from candidates are simple ones: are the questions in any particular order? and how do I know which part of the book a question comes from?

 

Once you know the answers, you stop flicking through 700+ pages at random. You start reading each question with a good idea of where its answer is.

 

This guide covers how the questions are spread across the parts of BS 7671 and a simple memory aid for the order they usually appear in. It then works through one example question for each part to show the keyword method in action.

The Exam at a Glance

 

DetailWhat to Know
QualificationCity & Guilds 2382-26
Based onBS 7671:2018+A4:2026 (the Amendment 4 book)
Format60 multiple-choice questions
Duration2 hours (120 minutes)
Shorter refresher paper?No. Everyone sits the full 60-question exam
Open book?Yes, using a clean, unannotated copy of BS 7671

 

The exam is split into learning outcomes, one for each part of the book. They don’t carry equal weight. The more important an outcome is to day-to-day electrical work, the more questions it gets.

 

Are the Questions in Part Order?

Usually, yes. In most papers the questions follow the order of the book: Part 1 first, then Part 2, and so on through to Part 8 and the Appendices. City & Guilds doesn’t guarantee this, though, so treat it as a strong clue and not a rule.

 

Here’s the typical spread of questions:

 

PartTopicApprox. QuestionsTypical Position
Part 1Scope, Object and Fundamental Principles4Q1–4
Part 2Definitions2Q5–6
Part 3Assessment of General Characteristics6Q7–12
Part 4Protection for Safety15Q13–27
Part 5Selection and Erection of Equipment14Q28–41
Part 6Inspection and Testing4Q42–45
Part 7Special Installations or Locations7Q46–52
Part 8 & AppendicesProsumers, plus supporting data8Q53–60

 

Key point: Parts 4 and 5 together account for about 29 of the 60 questions, almost half the paper. If you can find your way around those two parts quickly, you’ve covered most of the exam.

 

For a closer look at how the questions are worded and structured, see our guide to 18th Edition exam question format and types.

 

The Four-Block Memory Aid

You can’t take the table above into the exam, so you need a simpler picture to keep in your head. Think of the paper as four blocks of roughly 25% each:

 

BlockApprox. QuestionsCovers
11–15Parts 1, 2 and 3
216–30Part 4
331–45Part 5
446–60Parts 6, 7, 8 and the Appendices

 

The block boundaries are approximate. In practice, the first block is a little shorter and the last a little longer. That doesn’t stop the picture being useful. On question 10, it’s very unlikely to be about Part 6. On question 5, the answer is almost certainly in Part 1, 2 or 3.

 

Exam tip: Before you open the book, ask yourself: “Which question number am I on, and where in the book is that likely to be?” That one habit can cut your search time in half.

 

What You Can Take Into the Exam

Your exam centre will confirm the exact rules. Typically, they look like this:

 

PermittedNot Permitted
BS 7671:2018+A4:2026 (current book, no handwritten notes)Older editions of the book. An earlier amendment won’t do
Basic calculator (+, −, ×, ÷, √)Programmable calculators
Blank note paper and pencilsPads with course notes already written on them
A limited number of edge tabs marking part numbersPhones, smartwatches, tablets, e-notebooks, or anything that connects to the internet

 

Important: You can’t write formulas, notes or tutor search tips inside the book. Some centres give you a clean copy of their own so they know it hasn’t been marked. Make sure you can also find your way around a book with no tabs.

 

Make sure you can use every function on your calculator before exam day, especially the square root. The invigilator won’t show you how.

 

The Keyword Method

The exam never tells you which part a question comes from. You have to work it out. The fastest way is the keyword method:

 

  1. Read the whole question. Look out for words like “not” and “except”.
  2. Pick out the keywords, such as scope, defines, fire, earthing conductor, periodic, agricultural.
  3. Match the keywords to the contents pages at the front of the book to find the right part and chapter.
  4. Go to the chapter and scan for the keyword again to find the regulation.
  5. Read the regulation carefully and match it to one of the four answers.

 

We cover this in more depth in Using the Contents Page and Index to Find Answers Fast.

 

Remember: Page numbers change between amendments, so don’t learn them. Learn the regulation numbers and chapter structure, which mostly stay the same.

 

Worked Examples: Parts 1 to 3

Part 1: A Scope Question

Which type of electrical installation is included in the scope of BS 7671?

 

The keyword is scope, which points to Part 1, Scope, Object and Fundamental Principles. Regulation 110.1 lists the installations the regulations apply to, and electric vehicle charging installations are on that list. You can expect a scope question in nearly every paper.

 

Part 1: A “Not” Question

Which type of electrical installation is not included in the scope of BS 7671?

 

This looks almost the same as the last question, but it isn’t. The keywords are not included and scope. They take you to Regulation 110.2, Exclusions from scope, where electrical equipment of machines is listed.

 

Exam tip: Candidates often miss the word “not” and pick an answer from the wrong list. Underline it on your scrap paper every time you see it.

 

Part 2: A Definition Question

BS 7671 defines Earth as…

 

The keyword defines points to Part 2. Look up “Earth” on its own, not “earth electrode” or “earthing”. The definition is the conductive mass of the Earth, whose electric potential at any point is conventionally taken as zero.

 

Key point: Never guess definition questions. The correct answer almost always matches the wording in Part 2 word for word, so find the definition and look for the matching option.

 

Part 3: A Maximum Demand Question

When assessing the general characteristics of an installation, we must determine the maximum demand, and may take what into account?

 

Assessing the general characteristics is the title of Part 3. In Chapter 31 (Regulation 311.1), you’ll find that diversity may be taken into account.

 

Worked Examples: Parts 4 and 5

Part 4: A Thermal Effects Question

To minimise the risk of fire, what should be the minimum distance between a 200 W spotlight and combustible constructional material?

 

The keywords are risk of fire and combustible constructional materials. Fire is a thermal effect, so this belongs in Chapter 42, Protection against thermal effects. Regulation 422.4.202 gives the minimum distances for small spotlights and projectors:

 

Lamp RatingMinimum Distance
Up to 100 W0.5 m
Over 100 W, up to 300 W0.8 m
Over 300 W, up to 500 W1.0 m

 

A 200 W spotlight falls in the middle band, so the answer is 0.8 m.

 

Part 5: A Table Look-Up Question

When selecting a copper earthing conductor to be buried, what is the minimum CSA if it is not protected against corrosion?

 

The keywords are selecting, earthing conductor, copper and buried. Selection and erection means Part 5, and earthing means Chapter 54. Regulation 542.3 covers earthing conductors and refers you to Table 54.1. Go to the row for not protected against corrosion, then the copper column, and you’ll find 25 mm².

 

Part 5: A Calculation Question

The minimum CSA of a protective conductor is to be calculated. The fault current is 700 A, the disconnection time is 0.4 s and k = 115. What is the minimum size?

 

The word calculated tells you to get your calculator out. Protective conductor points to Chapter 54, where Regulation 543.1.3 gives the adiabatic equation:

 

StepWorkingResult
1I²t = 700 × 700 × 0.4196,000
2√196,000442.7
3S = 442.7 ÷ 1153.85 mm²
4Next standard size up4 mm²

 

The calculations don’t get much harder than this one. You might get one calculation question or three. If you need a refresher, see The Adiabatic Equation Explained.

 

Exam tip: Practise with the actual calculator you’ll take into the exam. Getting stuck on a square root under time pressure is an easy way to lose marks.

 

Worked Examples: Parts 6, 7 and 8

Part 6: A Certification Question

Which document is issued following a periodic inspection and test?

 

Periodic inspection takes you to Part 6, Chapter 65. Chapter 65 says an Electrical Installation Condition Report (EICR) shall be produced.

 

Part 7: A Special Location Question

Electrical equipment installed in agricultural or horticultural premises shall have a minimum degree of protection against external influences of…

 

Agricultural or horticultural premises takes you straight to Section 705. Look for external influences. Regulation 705.512.2 requires a minimum of IP44.

 

Part 8: A Prosumer Question

Within a prosumer’s low voltage electrical installation, following the PEI concept, what item is considered to be both a generator and a load?

 

“Prosumer” combines producer and consumer: an installation that both generates and uses electricity. The keywords prosumer and PEI concept lead to Part 8, Chapter 82, Regulation 823. The note there says a battery can be considered both a generator and a load.

 

Practise with Repetition

Knowing the method isn’t enough. You need to use it often enough that it becomes automatic. Repetition is what makes the book’s structure stick.

 

  1. Write out the question on a sheet of paper.
  2. Find the answer in the book using the keyword method, without looking at the solution first.
  3. Write out the answer along with its regulation number.
  4. Throw the paper away and do it again, then repeat the next day with a different set of questions.

 

Each round makes it easier to recognise a keyword and know where it sends you. Our article on the most common 18th Edition exam mistakes covers the other traps worth drilling, such as misreading questions and running short of time.

 

Remember: Already hold the 18th Edition from an earlier amendment? Check with your employer or competent person scheme whether they expect you to update to Amendment 4. See our guide to Amendment 4.

 

Practice and Further Study

The best way to get faster at finding answers is to work through realistic questions in roughly the same order the exam uses:

 

Our app includes 690+ practice questions covering all 8 parts. Each one has a detailed explanation that points to the exact regulation number, so you learn where every answer lives as well as what it is. Use the topic-specific quizzes to practise the keyword method one part at a time. Then take the timed mock exams, which use the same weighted question distribution as the real paper, to practise the four-block approach under exam conditions.

 

Study on the go with our mobile app: App Store | Google Play

Prepare for your exam with our mobile app

690+ practice questions with detailed explanations